Note: Prices do not include VAT.
3 -stage battery charger with a charging output
This battery charger is designed for professional use to recharge the batteries for automotive traditional, AGM, GEL and modern lithium-ion batteries.
In the first stage of charging is delivered constant current until reaching a Predetermined tension. At this point we pass to the second stage that delivers a constant voltage (absorbtion). When the battery charging will be the third stage (maintenance) reducing the voltage.
If at any time it That Detects the battery is low the cycle starts automatically.
Ideal for any use, boat, camper, photovoltaic systems, industry, etc. Specification of the functions via LED easy to interpret. Robust and reliable construction, low weight. High efficiency, charging times halved Compared to traditional battery chargers.
- Power (VAC): 180 -240Vac
- Frequency: 47-63 Hz
- Charging Voltage: 56.8 V (G), 57.6 V (S), 58.4 V (F/Li)
- Holding voltage (VDC): 55.2 V
- Charging current: 10A
- Outputs: 1
- Forced ventilation
- Operating temperature: 0/+50 ° C
- Size: 420x420x460 mm
- Weight: 3 kg
- Protections: Short circuit, overload protection, reverse polarity, temperature.
This battery charger does not have a power supply function and as such in order to provide voltage and current it needs to be connected to a battery with a minimum voltage of 10.7V.
If the battery voltage is less than 10.7V the battery charger will not activate and will not charge.
a battery with voltage of less than 10.7V could be faulty and a forced recharge could cause the acid to leak, an increase in internal pressure due to the gases and a possible explosion.