Note: Prices do not include VAT.
This battery charger can be used only with 6 or 12V acid batteries:
-When uploading, if overloaded, the charger resets the voltage to normal thanks to its automatic protection system.
-In case of a short circuit, the device will automatically turn off and then turn back on after a couple of minutes.
-Recharges your battery in a short time.
-Able to recharge 6 and 12V batteries.
Built with durable material and with a carry handle, connects to the battery via the terminal blocks.
• Input voltage: AC 230V/50Hz
• Output voltage: DC 6V/12V 5.6A
• input AC power: 100W
• Charging current: 8A max
• Battery capacity: 15-120Ah
• Overloading protection
• 1.4m charging cable / 1.7m power cord
This battery charger does not have a power supply function and as such in order to provide voltage and current it needs to be connected to a battery with a minimum voltage of 10.7V.
If the battery voltage is less than 10.7V the battery charger will not activate and will not charge.
a battery with voltage of less than 10.7V could be faulty and a forced recharge could cause the acid to leak, an increase in internal pressure due to the gases and a possible explosion.
• battery charger
• instruction booklet